DetailPage-MSS-KB

Microsoft small business knowledge base

Article ID: 235396 - Last Review: October 27, 2006 - Revision: 3.2

 
This article was previously published under Q235396

SUMMARY

This article describes how to determine the first Exchange Server computer in a site by running the Exchange Server Administrator program in Raw mode to assist you in troubleshooting many different System folder issues. You can perform this procedure on any Exchange Server computer in the site.

MORE INFORMATION

The identity of the first Exchange Server computer in the site is usually known. However, in some situations, because of administration or server configuration changes, the identity of the first Exchange Server computer in the site may be unknown.

To determine the first Exchange Server computer in the site, use the following steps:

WARNING: If you use the raw mode of the Exchange Server Administrator program (admin /r) incorrectly, serious problems may occur that may require you to reinstall Microsoft Windows NT Server, Microsoft Exchange Server, or both. Microsoft cannot guarantee that problems that result from using raw mode incorrectly can be solved. Use raw mode at your own risk.

  1. Start the Microsoft Exchange Server Administrator program in raw mode by typing the following at a command prompt:
    c:\exchsrvr\bin\admin /r
  2. In the Configuration container for the site, click Information Store Site Configuration.
  3. On the File menu, click Raw Properties.
  4. In the Object attributes section, find the Site-Folder-Server attribute.
  5. The name of the server in the Edit Value area is the first Exchange Server computer in the site.
NOTE: If the first Exchange Server computer in the site is removed from the site but is still listed, it may have been removed incorrectly. For information about how to correctly remove the first Exchange Server computer, refer to the following Microsoft Knowledge Base article:
152959  (http://support.microsoft.com/kb/152959/EN-US/ ) XADM: How to Remove the First Exchange Server in a Site
To correct this issue, refer to the following Microsoft Knowledge Base article:
152960  (http://support.microsoft.com/kb/152960/EN-US/ ) XADM: Reassigning Site Roles after Removing the First Server in an Exchange Site

APPLIES TO
  • Microsoft Exchange Server 4.0 Standard Edition
  • Microsoft Exchange Server 5.0 Standard Edition
  • Microsoft Exchange Server 5.5 Standard Edition
Keywords: 
kbenv kbinfo KB235396
Retired KB ArticleRetired KB Content Disclaimer
This article was written about products for which Microsoft no longer offers support. Therefore, this article is offered "as is" and will no longer be updated.
Share
Additional support options
Ask The Microsoft Small Business Support Community
Contact Microsoft Small Business Support
Find Microsoft Small Business Support Certified Partner
Find a Microsoft Store For In-Person Small Business Support