DetailPage-MSS-KB

Microsoft small business knowledge base

Article ID: 2598903 - Last Review: May 21, 2012 - Revision: 9.0

Hotfix Download Available
View and request hotfix downloads
 
Microsoft distributes Microsoft SQL Server 2008 or Microsoft SQL Server 2008 R2 fixes as one downloadable file. Because the fixes are cumulative, each new release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2008 or SQL Server 2008 R2 update release.

On This Page

SYMPTOMS

When you configure a SQL Server Agent job to run past midnight on specific days in Microsoft SQL Server 2005, in Microsoft SQL Server 2008 or in Microsoft SQL Server 2008 R2, the job randomly stops sometime after it runs past a time of 00:00. However, the job resumes running the next scheduled day.

For example, assume that you schedule a SQL Server Agent job to run from 22:00 to 02:00 on Monday, on Tuesday, on Wednesday, on Thursday, and on Friday. Additionally, you set the frequency to every 15 minutes. In this scenario, the job might stop at 23:45 on Monday and then resume at 22:00 on Tuesday.

Note This issue occurs in SQL Server 2005 only if you install one of the following update packages:
  • Cumulative update package 13 for SQL Server 2005 Service Package 3 (SP3) or a later cumulative update package for SQL Server 2005 SP3
  • Cumulative update package 3 for SQL Server 2005 Service Package 4 (SP4) or a later cumulative update package for SQL Server 2005 SP4
  • The security update 2494112 that is documented in security bulletin MS11-049 for SQL Server 2005 SP3

    For more information, click the following article number to view the article in the Microsoft Knowledge Base:
    2494112  (http://support.microsoft.com/kb/2494112/ ) MS11-049: Description of the security update for SQL Server 2005 Service Pack 3 QFE: June 14, 2011

RESOLUTION

Cumulative update information

SQL Server 2008 Service Pack 3

The fix for this issue was first released in Cumulative Update 5 for SQL Server 2008 Service Pack 3. For more information about this cumulative update package, click the following article number to view the article in the Microsoft Knowledge Base:
2696626  (http://support.microsoft.com/kb/2696626/LN/ ) Cumulative update package 5 for SQL Server 2008 Service Pack 3
Note Because the builds are cumulative, each new fix release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2008 fix release. Microsoft recommends that you consider applying the most recent fix release that contains this hotfix. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
2629969  (http://support.microsoft.com/kb/2629969/LN/ ) The SQL Server 2008 builds that were released after SQL Server 2008 Service Pack 3 was released
Microsoft SQL Server 2008 hotfixes are created for specific SQL Server service packs. You must apply a SQL Server 2008 Service Pack 3 hotfix to an installation of SQL Server 2008 Service Pack 3. By default, any hotfix that is provided in a SQL Server service pack is included in the next SQL Server service pack.

SQL Server 2008 R2

The fix for this issue was first released in Cumulative Update 11. For more information about how to obtain this cumulative update package for SQL Server 2008 R2, click the following article number to view the article in the Microsoft Knowledge Base:
2633145  (http://support.microsoft.com/kb/2633145/ ) Cumulative Update package 11 for SQL Server 2008 R2
Note Because the builds are cumulative, each new fix release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2008 R2 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
981356  (http://support.microsoft.com/kb/981356/ ) The SQL Server 2008 R2 builds that were released after SQL Server 2008 R2 was released

SQL Server 2008 R2 Service Pack 1

The fix for this issue was first released in Cumulative Update 4 for SQL Server 2008 R2 Service Pack 1. For more information about how to obtain this cumulative update package, click the following article number to view the article in the Microsoft Knowledge Base:
2633146  (http://support.microsoft.com/kb/2633146/ ) Cumulative Update package 4 for SQL Server 2008 R2 Service Pack 1
Note Because the builds are cumulative, each new fix release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2008 R2 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
2567616  (http://support.microsoft.com/kb/2567616/ ) The SQL Server 2008 R2 builds that were released after SQL Server 2008 R2 Service Pack 1 was released

SQL Server 2008 Service Pack 2

The fix for this issue was first released in Cumulative Update 7 for SQL Server 2008 Service Pack 2. For more information about this cumulative update package, click the following article number to view the article in the Microsoft Knowledge Base:
2617148  (http://support.microsoft.com/kb/2617148/LN/ ) Cumulative update package 7 for SQL Server 2008 Service Pack 2
Note Because the builds are cumulative, each new fix release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2008 fix release. Microsoft recommends that you consider applying the most recent fix release that contains this hotfix. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
2402659  (http://support.microsoft.com/kb/2402659/LN/ ) The SQL Server 2008 builds that were released after SQL Server 2008 Service Pack 2 was released
Microsoft SQL Server 2008 hotfixes are created for specific SQL Server service packs. You must apply a SQL Server 2008 Service Pack 2 hotfix to an installation of SQL Server 2008 Service Pack 2. By default, any hotfix that is provided in a SQL Server service pack is included in the next SQL Server service pack.

SQL Server 2008 Service Pack 1

The fix for this issue was first released in Cumulative Update 16 for SQL Server 2008 Service Pack 1. For more information about this cumulative update package, click the following article number to view the article in the Microsoft Knowledge Base:
2582282  (http://support.microsoft.com/kb/2582282/LN/ ) Cumulative update package 16 for SQL Server 2008 Service Pack 1
Note Because the builds are cumulative, each new fix release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2008 fix release. Microsoft recommends that you consider applying the most recent fix release that contains this hotfix. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
970365  (http://support.microsoft.com/kb/970365/LN/ ) The SQL Server 2008 builds that were released after SQL Server 2008 Service Pack 1 was released
Microsoft SQL Server 2008 hotfixes are created for specific SQL Server service packs. You must apply a SQL Server 2008 Service Pack 1 hotfix to an installation of SQL Server 2008 Service Pack 1. By default, any hotfix that is provided in a SQL Server service pack is included in the next SQL Server service pack.

Hotfix information

SQL Server 2005

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem.

If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, submit a request to Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:
http://support.microsoft.com/contactus/?ws=support (http://support.microsoft.com/contactus/?ws=support)
Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, you must have SQL Server 2005 SP3 or SQL Server 2005 SP4 installed.

Restart requirement

You might have to restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace a previously-released hotfix.

File information

The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.
SQL Server 2005 SP4
Collapse this tableExpand this table
File name File version File size Date Time Platform LCID
sqlsvc90.dll 2005.90.5295.0 104288 15-Aug-11 23:15 x86 1033
sqlsvc90.dll 2005.90.5295.0 13040015-Aug-11 23:22 x64 1033
sqlsvc90.dll 2005.90.5295.0 377184 16-Aug-11 2:08 IA-64 1033
SQL Server 2005 SP3
Collapse this tableExpand this table
File name File version File size Date Time Platform LCID
sqlsvc90.dll 2005.90.4342.0 104288 15-Aug-11 18:48 x86 1033
sqlsvc90.dll 2005.90.4342.0 130400 15-Aug-11 20:14 x64 1033
sqlctr90.dll 2005.90.4342.0 128864 16-Aug-11 1:02 IA-64 1033


STATUS

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

APPLIES TO
  • Microsoft SQL Server 2005 Service Pack 4, when used with:
    • Microsoft SQL Server 2005 Developer Edition
    • Microsoft SQL Server 2005 Enterprise Edition
    • Microsoft SQL Server 2005 Enterprise Edition for Itanium-based Systems
    • Microsoft SQL Server 2005 Enterprise X64 Edition
    • Microsoft SQL Server 2005 Express Edition
    • Microsoft SQL Server 2005 Standard Edition
    • Microsoft SQL Server 2005 Standard Edition for Itanium-based Systems
    • Microsoft SQL Server 2005 Standard X64 Edition
  • Microsoft SQL Server 2005 Service Pack 3, when used with:
    • Microsoft SQL Server 2005 Developer Edition
    • Microsoft SQL Server 2005 Enterprise Edition
    • Microsoft SQL Server 2005 Enterprise Edition for Itanium-based Systems
    • Microsoft SQL Server 2005 Enterprise X64 Edition
    • Microsoft SQL Server 2005 Express Edition
    • Microsoft SQL Server 2005 Standard Edition
    • Microsoft SQL Server 2005 Standard Edition for Itanium-based Systems
    • Microsoft SQL Server 2005 Standard X64 Edition
  • Microsoft SQL Server 2008 Developer
  • Microsoft SQL Server 2008 Enterprise
  • Microsoft SQL Server 2008 Express
  • Microsoft SQL Server 2008 Service Pack 1
  • Microsoft SQL Server 2008 Standard
  • Microsoft SQL Server 2008 Web
  • Microsoft SQL Server 2008 R2 Developer
  • Microsoft SQL Server 2008 R2 Enterprise
  • Microsoft SQL Server 2008 R2 Express
  • Microsoft SQL Server 2008 R2 Standard
  • Microsoft SQL Server 2008 R2 Web
Keywords: 
kbautohotfix kbqfe kbhotfixserver kbfix kbexpertiseadvanced kbsurveynew KB2598903
Share
Additional support options
Ask The Microsoft Small Business Support Community
Contact Microsoft Small Business Support
Find Microsoft Small Business Support Certified Partner
Find a Microsoft Store For In-Person Small Business Support