DetailPage-MSS-KB

Microsoft small business knowledge base

Article ID: 263764 - Last Review: December 23, 2014 - Revision: 3.0

This article has been archived. It is offered "as is" and will no longer be updated.
If this article does not describe the error message that you are receiving, view the following Microsoft Knowledge Base article to view more articles that describe error messages:
315854  (http://support.microsoft.com/kb/315854/EN-US/ ) Windows 98 and Windows Me Error Message Resource Center

Symptoms

When you insert a PC Card device into your computer, you may experience one of the following symptoms:
  • A "fatal exception" error message is displayed on a blue screen.
  • Your USB device(s) do not function.
  • Msgsrv is listed as "not responding" in Task Manager.

    NOTE: To start Task Manager, press and hold down the CTRL+ALT keys, and then press the DELETE key once.

Cause

This problem can occur if the PC Card insertion causes a rebalance of system resources for the USB host controller.

Workaround

To work around this issue, remove the ability for Windows or the BIOS to change (rebalance) the host controller's resources by using the following steps:
  1. Click Start, point to Settings, click Control Panel, and then double-click System (if the System icon is not displayed in Control Panel, click the View all Control Panel icons link on the left side of Control Panel).
  2. On the Device Manager tab, click the plus sign (+) next to Universal Serial Bus Controllers.
  3. Click USB Host Controller, and then click the Properties button.
  4. On the Resources tab, click to clear the Use Automatic Settings check box.
  5. Choose a basic configuration from the list that does not cause device(s) to appear in the Conflicting Device List, and then click OK.
  6. You may receive a warning message that indicates that Plug and Play functionality is limited by forcing a specific configuration. Click Yes to continue.
  7. Click Close.
  8. Restart your computer.
NOTE: In some circumstances you may not be able to manually set the basic configuration for the USB host controller, so this workaround does not work.

If you insert a PC Card after you use this workaround, your computer may become unstable. For example, you may not be able to restart your computer after the device recognition. If this behavior occurs, remove the USB device before you insert the PC Card. Then, after you insert the PC Card, connect the USB device again.
Keywords: 
kbnosurvey kbarchive kberrmsg kbfatalexerr0d kbfatalexerr0e kbhardware kbprb KB263764
Share
Additional support options
Ask The Microsoft Small Business Support Community
Contact Microsoft Small Business Support
Find Microsoft Small Business Support Certified Partner
Find a Microsoft Store For In-Person Small Business Support