DetailPage-MSS-KB

Microsoft small business knowledge base

Article ID: 2746164 - Last Review: February 19, 2013 - Revision: 2.0

On This Page

Summary

Microsoft has released Update Rollup 6 for Microsoft Exchange Server 2010 Service Pack 2 (SP2). This update is dated February 12, 2013. This article describes the following information about the update rollup:
  • The issues that the update rollup resolves
  • How to obtain the update rollup
  • The prerequisites to install the update rollup

INTRODUCTION

Issues that the update rollup resolves

Update Rollup 6 for Exchange Server 2010 SP2 addresses the vulnerabilities that are described in Microsoft Security Bulletin MS13-012 (http://technet.microsoft.com/en-us/security/Bulletin/MS13-012) . This update also resolves the following issues:
  • 2489941  (http://support.microsoft.com/kb/2489941/ ) The "legacyExchangeDN" value is shown in the "From" field instead of the "Simple Display Name" in an email message in an Exchange Server 2010 environment
  • 2717453  (http://support.microsoft.com/kb/2717453/ ) You cannot move or delete a folder by using Outlook in online mode in an Exchange Server 2010 environment
  • 2733608  (http://support.microsoft.com/kb/2733608/ ) Corrupted Japanese DBCS characters when you send a meeting request or post a reply to a posted item in a public folder in an Exchange Server 2010 environment
  • 2734635  (http://support.microsoft.com/kb/2734635/ ) Folder-associated information (FAI) items are deleted when you run the New-InboxRule cmdlet or change Inbox rules in an Exchange Server 2010 environment
  • 2737046  (http://support.microsoft.com/kb/2737046/ ) AutoPreview feature does not work when you use Outlook in online mode in an Exchange Server 2010 environment
  • 2741117  (http://support.microsoft.com/kb/2741117/ ) High CPU utilization by Microsoft Exchange Replication service on Client Access servers in an Exchange Server 2010 environment
  • 2746030  (http://support.microsoft.com/kb/2746030/ ) Incorrect ExternalURL value for EWS is returned by an Exchange Server 2010 Client Access server
  • 2750188  (http://support.microsoft.com/kb/2750188/ ) Exchange Service Host service crashes when you start the service on an Exchange 2010 server
  • 2751417  (http://support.microsoft.com/kb/2751417/ ) Synchronization fails if you sync an external device to a mailbox through EAS in an Exchange Server 2010 environment
  • 2751581  (http://support.microsoft.com/kb/2751581/ ) OAB generation fails with event IDs 9126, 9330, and either 9338 or 9339 in an Exchange Server 2010 environment
  • 2760999  (http://support.microsoft.com/kb/2760999/ ) "The signup domain 'org' derived from '<TenantDomainName>.org' is not a valid domain" error message when you use the Hybrid Configuration wizard in an Exchange Server
  • 2776259  (http://support.microsoft.com/kb/2776259/ ) Msftefd.exe process crashes if an email attachment has an unexpected file name extension or no file name extension in an Exchange Server 2010 environment
  • 2779387  (http://support.microsoft.com/kb/2779387/ ) Duplicated email messages are displayed in the Sent Items folder in a EWS-based application that accesses an Exchange Server 2010 Mailbox server
  • 2783586  (http://support.microsoft.com/kb/2783586/ ) Name order of a contact is displayed incorrectly after you edit the contact in an Exchange Server 2010 environment
  • 2783631  (http://support.microsoft.com/kb/2783631/ ) User-Agent field is empty when you run the Get-ActiveSyncDeviceStatistics cmdlet in an Exchange Server 2010 SP2 environment
  • 2783633  (http://support.microsoft.com/kb/2783633/ ) You cannot move or delete an email message that is larger than the maximum receive or send size in an Exchange Server 2010 environment
  • 2783649  (http://support.microsoft.com/kb/2783649/ ) Private appointment is visible to a delegate in an Exchange Server 2010 environment
  • 2783771  (http://support.microsoft.com/kb/2783771/ ) Mailbox on a mobile device is not updated when EAS is configured in an Exchange Server 2010 environment
  • 2783772  (http://support.microsoft.com/kb/2783772/ ) Edgetransport.exe process crashes after a journal recipient receives an NDR message in an Exchange Server 2010 environment
  • 2783776  (http://support.microsoft.com/kb/2783776/ ) You cannot perform a cross-premises search in a mailbox in an Exchange Server 2010 hybrid environment
  • 2783782  (http://support.microsoft.com/kb/2783782/ ) Error message when you use Scanpst.exe on a .pst file in an Exchange Server 2010 environment
  • 2784081  (http://support.microsoft.com/kb/2784081/ ) Store.exe process crashes if you add certain registry keys to an Exchange Server 2010 Mailbox server
  • 2784083  (http://support.microsoft.com/kb/2784083/ ) Week numbers in the Outlook Web App and Outlook calendars are mismatched in an Exchange Server 2010 environment
  • 2784093  (http://support.microsoft.com/kb/2784093/ ) SCOM alerts and event ID 4 in an Exchange Server 2010 SP2 organization that has Update Rollup 1 or later
  • 2784566  (http://support.microsoft.com/kb/2784566/ ) Exchange RPC Client Access service crashes on an Exchange Server 2010 Mailbox server
  • 2787023  (http://support.microsoft.com/kb/2787023/ ) Exchange Mailbox Assistants service crashes when you try to change a recurring calendar item or publish free/busy data in an Exchange Server 2010 environment
  • 2788151  (http://support.microsoft.com/kb/2788151/ ) Empty delegates list for a cloud-based resource mailbox when you use EMC in an on-premises Exchange Server 2010 SP2 environment
  • 2793274  (http://support.microsoft.com/kb/2793274/ ) A new option is available that disables the PermanentlyDelete retention action in an Exchange Server 2010 organization
  • 2793278  (http://support.microsoft.com/kb/2793278/ ) You cannot use the search function to search for mailbox items in an Exchange Server 2010 environment
  • 2793279  (http://support.microsoft.com/kb/2793279/ ) Exchange Server 2010 does not restart when the Microsoft Exchange Replication service freezes
  • 2793488  (http://support.microsoft.com/kb/2793488/ ) Internet Explorer freezes when you connect to the OWA several times in an Exchange Server 2010 environment
  • 2810616  (http://support.microsoft.com/kb/2810616/ ) Email message delivery is delayed on a Blackberry mobile device after you install Update Rollup 4 for Exchange Server 2010 SP2

Resolution

Update rollup information

To download and install Update Rollup 6 for Exchange Server 2010 SP2, go to the following Microsoft Update website:
http://update.microsoft.com (http://update.microsoft.com )
For more information about how to install the latest Update Rollup for Exchange 2010, go to the following Microsoft website:
General information about how to install the latest Update Rollup for Exchange 2010 (http://technet.microsoft.com/en-us/library/ff637981.aspx)
Note Microsoft Update does not detect update rollups on Exchange Server 2010 mailbox servers that are part of a database availability group (DAG).

To enable you to apply this update rollup in the following scenarios, the update rollup is also available from the Microsoft Download Center:
  • Deploy Update Rollup 6 for Exchange Server 2010 SP2 to multiple computers that are running Exchange Server 2010 SP2
  • Deploy Update Rollup 6 for Exchange Server 2010 SP2 to mailbox servers that are part of a DAG
The file is available for download from the following Microsoft Download Center website:
Download the Exchange2010-2746164-x64 package now. (http://www.microsoft.com/downloads/details.aspx?FamilyID=498e7612-73b5-4e28-99a4-b3157ac69932)
Release date: February 12, 2013.

Important information for customers who install the update on computers that are not connected to the Internet

When you install this update rollup on a computer that is not connected to the Internet, you may experience long installation times. Additionally, you may receive the following message:
Creating Native images for .Net assemblies.
This behavior is caused by network requests to connect to the http://crl.microsoft.com/pki/crl/products/CodeSigPCA.crl (http://crl.microsoft.com/pki/crl/products/CodeSigPCA.crl) website. These network requests represent attempts to access the certificate revocation list for each assembly that native image generation (NGen) compiles to native code. However, because the Exchange server is not connected to the Internet, each request must wait to time out before the process continues.

To resolve this issue, follow these steps:
  1. On the Tools menu in Windows Internet Explorer, click Internet Options, and then click the Advanced tab.
  2. In the Security section, click to clear the Check for publisher's certificate revocation check box, and then click OK.
We recommend that you clear this security option in Internet Explorer only if the computer is in a tightly controlled environment. When setup is complete, click to select the Check for publisher’s certificate revocation check box again.

Update issue on computers that have customized Outlook Web App files

Important Before you apply the update rollup, we recommend that you make a backup copy of any customized Outlook Web App files. For more information about how to customize Outlook Web App, go to the following Microsoft website:
Outlook Web App customization details (http://technet.microsoft.com/en-us/library/ee633483(EXCHG.140).aspx )
When you apply an update rollup package, the update process updates the Outlook Web App files if they are required. Therefore, any customizations to the Logon.aspx file or to other Outlook Web App files are overwritten, and you must re-create the Outlook Web App customizations in Logon.aspx.

Update issue for CAS Proxy Deployment Guidance customers who deploy CAS-CAS proxying

If you meet both of the following conditions, apply the update rollup on the Internet-facing Client Access servers before you apply the update rollup on the non-Internet-facing Client Access servers:
  • You are a CAS Proxy Deployment Guidance customer.
  • You have deployed CAS-CAS proxying.

Note For other Exchange Server 2010 configurations, you do not have to apply the update rollup on the servers in a certain order.

For more information about CAS-CAS proxying, go to the following Microsoft website:
General information about CAS-CAS proxying (http://technet.microsoft.com/en-us/library/bb310763(EXCHG.140).aspx )

Prerequisites

To apply this update rollup, you must have Exchange Server 2010 SP2 installed.

Note Remove all interim updates for Exchange Server 2010 SP2 before you apply this update rollup.

Restart requirement

The required services are automatically restarted when you apply this update rollup.

Removal information

To remove Update Rollup 6 for Exchange Server 2010 SP2, use the Add or Remove Programs item in Control Panel to remove update 2746164.

REFERENCES

For more information about terminology that Microsoft uses to describe software updates, click the following article number to view the article in the Microsoft Knowledge Base:
824684  (http://support.microsoft.com/kb/824684/ ) Description of the standard terminology that is used to describe Microsoft software updates

Applies to
  • Microsoft Exchange Server 2010 Service Pack 2, when used with:
    • Microsoft Exchange Server 2010 Enterprise
    • Microsoft Exchange Server 2010 Standard
Keywords: 
kbqfe kbfix kbexpertiseinter kbsurveynew atdownload kbhotfixrollup KB2746164
Share
Additional support options
Ask The Microsoft Small Business Support Community
Contact Microsoft Small Business Support
Find Microsoft Small Business Support Certified Partner
Find a Microsoft Store For In-Person Small Business Support