DetailPage-MSS-KB

Microsoft small business knowledge base

Article ID: 314068 - Last Review: March 29, 2005 - Revision: 2.3

This article was previously published under Q314068
For a Microsoft Windows 2000 version of this article, see 252420  (http://support.microsoft.com/kb/252420/ ) .


Note This article is for informational use only. It does not contain any troubleshooting information. If you are searching for troubleshooting information that is not mentioned in this article, search the Microsoft Knowledge Base again by using keywords that are listed in the following Microsoft Knowledge Base article:
242450  (http://support.microsoft.com/kb/242450/ ) How to Query the Microsoft Knowledge Base Using Keywords

SUMMARY

This article offers a general description of how interrupt request (IRQ) sharing is managed in Windows XP. The description includes an explanation of why many of the devices on your computer seem to use the same IRQ and why Windows XP does not include resource rebalancing.

MORE INFORMATION

In Windows, peripheral component interconnect (PCI) devices can share IRQs. In accordance with the Plug and Play capability that is defined by the PCI specification, adapters are configured by the computer BIOS and are then examined by the operating system and changed if necessary. Typically, PCI devices have IRQs shared among them, especially on Advanced Configuration and Power Interface (ACPI) computers that have Windows ACPI support enabled.

In Windows XP, Device Manager may list some or all the devices on your ACPI motherboard as using the same IRQ (IRQ 9). (To view the list of resources, click either Resources by type or Resources by connection on the View menu). No option is available to change the IRQ setting. Windows takes advantage of the ACPI features of the motherboard, including advanced PCI sharing. The PCI bus uses IRQ 9 for IRQ steering. With this feature, you can add more devices without IRQ conflicts.

Windows XP cannot rebalance resources in the same way that Microsoft Windows 98 does. After PCI resources are set, they generally cannot be changed. If you change to an incorrect IRQ setting or I/O range for the bus that a device is on, Windows XP cannot compensate by rebalancing the resource that was assigned to that bus.

Windows XP does not have this ability because of the more complex hardware schemas that Windows XP is designed to support. Windows 98 does not have to support IOAPICs, multiple root PCI buses, multiple-processor systems, and other highly complex hardware schemas. When you are dealing with these hardware schemas, rebalancing becomes risky and therefore is not implemented in Windows XP except for very specific scenarios. However, PCI devices must be able to share IRQs. Generally, the ability to share IRQs does not prevent any hardware from working.

The Plug and Play operating system settings in the computer BIOS do not generally affect how Windows XP handles the hardware. However, Microsoft recommends that you set the Plug and Play operating system setting to No or Disabled in the computer BIOS. For information about viewing or modifying the computer BIOS settings, see the computer documentation, or contact the computer manufacturer.

Manually assigning IRQs to PCI slots in the system BIOS as a troubleshooting method may work on some non-ACPI systems that use a standard PC hardware abstraction layer (HAL), but these settings are ignored by Plug and Play in Windows if ACPI support is enabled. If you must manually assign IRQ addresses through the BIOS to a device on an ACPI motherboard, you must reinstall Windows to force the installation to use a Standard PC HAL.

For more information, click the following article number to view the article in the Microsoft Knowledge Base:
299340  (http://support.microsoft.com/kb/299340/ ) How to force a hardware abstraction layer during an upgrade or new installation of Windows XP

APPLIES TO
  • Microsoft Windows XP Home Edition
  • Microsoft Windows XP Professional
Keywords: 
kbenv kbhardware kbinfo kbplugplay KB314068
Share
Additional support options
Ask The Microsoft Small Business Support Community
Contact Microsoft Small Business Support
Find Microsoft Small Business Support Certified Partner
Find a Microsoft Store For In-Person Small Business Support